compulsory, single

—

Inside the <tablescope> element the scope parameters for the generation of decompression tables (see also <calculatetable>) are put into brackets.

If <table> is given, <tablescope> must occur, too.

<table>

<altitude>, <bottomtimemaximum>, <bottomtimeminimum>, <bottomtimestepbegin>, <bottomtimestepend>, <divedepthbegin>, <divedepthend>, <divedepthstep>

<table>

(see also <table>)

<table id="decotable_nitrox4060_0m">
    <!-- cross reference to a previous dive ("dive500"); on basis of the tissue -->
    <!-- saturation due to this previous dive now the table is to be generated -->
    <link ref="dive500"/>
    <!-- cross reference to the breathing gas to be used -->
    <link ref="nitrox4060"/>
    <surfaceintervalbeforedive>
        <!-- a pause of 3 h between dives -->
        <passedtime>10800.0</passedtime>
    </surfaceintervalbeforedive>
    <!-- salt water -->
    <density>1030.0</density>
    <!-- in the following statements for output into a file -->
    <output>
        <!-- output language is English -->
        <lingo>en</lingo>
        <!-- PDF format (-> file extension ".pdf") -->
        <fileformat>pdf</fileformat>
        <!-- name of output file (extension ".pdf" must not be given!) -->
        <filename>table_nitrox4060_0m</filename>
        <!-- headline for table -->
        <headline>Table for Sealevel - Nitrox 40/60</headline>
        <!-- some illustrative text or other remarks -->
        <remark>
            This is a special table for our proposed descent to the shallow south of Gabiniere.
        </remark>
    </output>
    <applicationdata>
        <!-- here software specific data -->
    </applicationdata>
    <decomodel>zh-l16</decomodel>
    <!-- take into account deep stops of 1 minute length -->
    <deepstoptime>60.0</deepstoptime>
    <!-- maximum ascending rate 10 m/min -->
    <maximumascendingrate>0.1666666667</maximumascendingrate>
    <tablescope>
        <!-- height above sea level for which the table is to be calculated -->
        <altitude>0.0</altitude>
        <!-- beginning with a depth of 3 m, maximum depth 30 m, increment 3 m  -->
        <divedepthbegin>3.0</divedepthbegin>
        <divedepthend>30.0</divedepthend>
        <divedepthstep>3.0</divedepthstep>
        <!-- maximum bottom time 30 minutes, to be taken into account for the table -->
        <bottomtimemaximum>1800.0</bottomtimemaximum>
        <!-- minimum bottom time 5 minutes, to be taken into account for the table -->
        <bottomtimeminimum>300.0</bottomtimeminimum>
        <!-- at beginning (at minimum dive depth) increment of 10 minutes -->
        <bottomtimestepbegin>600.0</bottomtimestepbegin>
        <!-- at the end (at maximum dive depth) increment of 1 minute -->
        <!-- Schrittweite auf der maximalen Tauchtiefe 1 Minute -->
        <bottomtimestepend>60.0</bottomtimestepend>
    </tablescope>
</table>